multi

Produce Process Prosper ICAR - CIPHET
National Database on NARES Technologies in Post-Harvest Sector

View Equipment used in Operation

Advanced Search

ADVANCED CROP SEARCH

Crop Category

Crop

Type of Machine

×

Manufacturer Supplier

No Vendor Available

×

Manufacturer Supplier

No Vendor Available

#	Equipment	Operation Type	Capacity	Price (Rs.)	Photograph	Remarks
1	USER FRIENDLY TOOL FOR PULP/SEED SEPARATION FROM T	Seed Extractor	95 fruits/h	₹ 6,000.00		Palmyrah palm view other details Other Crops Detail Dimension: 300250450 mm Man power required: 1 Prime mover: Manual operation The equipment consists of a knife and a U-shaped cutting blade. A stainless steel (SS 302) knife of length 20 cm and width 9 cm is fitted in a frame work. This knife can be moved up and down to cut the top and bottom portion of the fruit. A “U” shaped blade made of stainless steel was used to remove the seeds. Cutting edge was sharpened by using a file. The blade has a length of 120 mm and height of 60 mm. The two arms of the blade were inserted parallel to the sides of the seed from top of the fruit. Then the blade was pulled out and the seed is removed from the husk
2	TOOL FOR PULP/SEED SEPARATION FROM TODDY PALM	Seed Extractor	95 fruits/h	₹ 6,000.00		Palmyrah palm view other details Other Crops Detail Dimension: 300250450 mm Man power required: 1 Prime mover: Manual operation The equipment consists of a knife and a U-shaped cutting blade. A stainless steel (SS 302) knife of length 20 cm and width 9 cm is fitted in a frame work. This knife can be moved up and down to cut the top and bottom portion of the fruit. A “U” shaped blade made of stainless steel was used to remove the seeds. Cutting edge was sharpened by using a file. The blade has a length of 120 mm and height of 60 mm. The two arms of the blade were inserted parallel to the sides of the seed from top of the fruit. Then the blade was pulled out and the seed is removed from the husk